Teknik Şartnameler.

Technical Specifications and Applications of Fire Exit Doors and Fire-Rated Shaft Access Doors

Below are the technical specifications, fire-resistance classifications and recommended applications of our fire exit doors and fire-rated shaft access doors.

E180–EI2 60 Fire Exit Doors: Technical Specifications and Applications

• E (Integrity): Indicates that the fire exit door maintains its integrity against fire for 180 minutes.
• I2 (Thermal Insulation): Indicates that the fire exit door provides thermal insulation against fire for 60 minutes.

Applications: Low-rise buildings and buildings with a low fire risk and low fire load.

Technical Specifications:

• Door leaf sheets: 0.8 mm + 0.8 mm galvanized steel
• Door leaf core: Rock wool insulation between two gypsum boards, reinforced with two omega-shaped steel profiles
• Weld-free, press-formed construction
• Two hinges, including one spring-loaded hinge
• Electrostatic powder-coated finish
• Frame and architrave: Adjustable frame manufactured from 1.5 mm cold-rolled steel sheet, with profiled architrave
• Panic bar, with an optional external lever handle

E90–EI2 90 Fire Exit Doors: Technical Specifications and Applications

Applications: High-rise buildings, residential complexes, hotels and similar buildings with a high fire risk or fire load.

Technical Specifications:

• Door leaf sheets: 0.8 mm + 0.8 mm galvanized steel
• Door leaf core: Rock wool insulation between two gypsum boards, reinforced with two omega-shaped steel profiles
• Weld-free, press-formed construction
• Three hinges, including one spring-loaded hinge
• Electrostatic powder-coated finish
• Frame and architrave: Adjustable frame manufactured from 1.5 mm cold-rolled steel sheet, with profiled architrave
• Panic bar, with an optional external lever handle

E (Integrity): Indicates that the fire exit door maintains its integrity against fire for 90 minutes.

I2 (Thermal Insulation): Indicates that the fire exit door provides thermal insulation against fire for 90 minutes.

E120–EI2 120 Fire Exit Doors: Technical Specifications and Applications

Applications: High-rise buildings, residential complexes, hotels, shopping centres, paint production facilities, chemical production facilities and similar buildings with a medium-to-high fire risk or fire load.

Technical Specifications:

• Door leaf sheets: 1 mm + 1 mm cold-rolled steel
• Door leaf core: Rock wool insulation between two gypsum boards, reinforced with two omega-shaped steel profiles
• Weld-free, press-formed construction
• Fire-resistant insulation blanket
• Three hinges, including one spring-loaded hinge
• Electrostatic powder-coated finish
• Frame and architrave: Adjustable frame manufactured from 1.5 mm cold-rolled steel sheet, with profiled architrave
• Panic bar, with an optional external lever handle

E (Integrity): Indicates that the fire exit door maintains its integrity against fire for 120 minutes.

I2 (Thermal Insulation): Indicates that the fire exit door provides thermal insulation against fire for 120 minutes.

E120–EI2 60 Fire Exit Doors, 120 cm Wide: Technical Specifications and Applications

Applications: These doors are designed for hospitals and main exit routes in high-rise buildings. The dimensions and configuration of a certified fire door must correspond to the intended installation. For example, a fire exit door certified at a width of 90 cm cannot automatically be considered suitable for an opening requiring a 120 cm wide door.

Technical Specifications:

• Door leaf sheets: 0.9 mm + 0.9 mm galvanized steel
• Door leaf core: Rock wool insulation between two gypsum boards, reinforced with two omega-shaped steel profiles
• Weld-free, press-formed construction
• Three hinges, including one spring-loaded hinge
• Electrostatic powder-coated finish
• Frame and architrave: Adjustable frame manufactured from 1.5 mm cold-rolled steel sheet, with profiled architrave
• Panic bar, with an optional external lever handle

E (Integrity): Indicates that the fire exit door maintains its integrity against fire for 120 minutes.

I2 (Thermal Insulation): Indicates that the fire exit door provides thermal insulation against fire for 60 minutes.

E90–EI2 60 Double-Leaf Glazed Fire Exit Doors: Technical Specifications and Applications

Applications: Suitable for main building exits, car park exits, primary factory evacuation routes and main evacuation exits in shopping centres. A fire-resistance certificate issued for a single-leaf door does not automatically apply to a double-leaf fire door. The selected double-leaf configuration must be covered by the relevant test evidence and certification.

Technical Specifications:

• Door leaf sheets: 1 mm + 1 mm galvanized steel
• Door leaf core: Rock wool insulation between two gypsum boards, reinforced with two omega-shaped steel profiles
• Weld-free, press-formed construction
• Six spring-loaded hinges
• Electrostatic powder-coated finish
• Frame and architrave: Adjustable frame manufactured from 1.5 mm cold-rolled steel sheet, with profiled architrave
• Panic bar, with an optional external lever handle
• Active and inactive door leaves with a concealed bolt system
• Optional door coordinator and horizontal or vertical panic exit devices

E (Integrity): Indicates that the fire exit door maintains its integrity against fire for 90 minutes.

I2 (Thermal Insulation): Indicates that the fire exit door provides thermal insulation against fire for 60 minutes.

Fire-Rated Shaft Access Doors: Technical Specifications

Fire-rated shaft access doors are used to help control the spread of fire through electrical and mechanical service shafts between floors. They can be combined with fire-stopping systems between storeys to help compartmentalise shaft openings. Suitable solutions can also be produced for applications requiring decorative timber cladding.

Technical Specifications:

• Door leaf thickness: 60 mm
• Door leaf sheets: 0.8 mm + 0.8 mm galvanized steel
• Internal core: Rock wool insulation between two gypsum boards, with two steel reinforcement profiles
• Frame: 1.5 mm cold-rolled steel sheet, welded on all four sides and fitted with fire-tested hinges
• Electrostatic powder-coated finish in the selected RAL colour
• Triangular utility lock operated with a hex key

Custom Metal Doors

Custom metal doors are manufactured from steel box sections and sheet metal according to project specifications. Available options include ventilation grilles, insect mesh, weather hoods and surface-mounted locks. Typical applications include transformer rooms, electrical rooms and other technical service areas.

Stainless Steel Doors

Stainless steel doors are manufactured from satin-finished 304-grade stainless steel. The 60 mm thick door leaf consists of 0.8 mm + 0.8 mm stainless steel sheets. Its internal core contains rock wool insulation between two gypsum boards and omega-shaped steel reinforcement profiles. The frame is manufactured from cold-rolled steel with 1 mm stainless steel cladding. Hot-dip galvanized hinges are used.

Information from the Turkish Standards Institution Certification Directive

Section 4, Article 15: Test certificates and/or inspection and test reports issued by organisations that are members of an agreement to which the Turkish Standards Institution (TSE) is a party, or by organisations that have a mutual recognition agreement with TSE, may be accepted by the relevant certification unit.

(3) Inspection and test reports and certificates submitted by the applicant may be accepted by the relevant certification unit if they have been issued by laboratories or conformity assessment bodies accredited by TÜRKAK, by accredited organisations recognised by TÜRKAK, or by laboratories and conformity assessment bodies whose competence has been accepted by TSE.

You can download the complete TSE information directive by clicking here.